Opens pressed PET bottle bales and feeds bottles evenly into the next recycling step.

• Four roller cylinders feed bottles evenly, and motor speed is adjusted by inverter.
• Machine chamber is made from solid strong steel, with 20 mm thick claw steel.
• Forklift working platform or temporary bale storage hopper can be configured.

Loosens PET bottles, removes sand, rock and stone from bottles, and feeds material constantly to the next step.

• Special feed inlet design helps prevent material overflow and falling.
• Track and gear use forged steel with heat treatment for strong operation.
• High platform and dirty collecting chute allow jumbo bags underneath for waste collection.

Removes labels from PET bottles before sorting and crushing.

• Alloyed steel blades are screw fixed, making adjustment and replacement easy.
• Hydraulic barrel lifting system makes blade maintenance more convenient.
• Bottom holes drain liquid contained in bottles, helping protect machine operation.

Manually sorts remaining labels, different color bottles and non-PET bottles from the material stream.

• Belt moving speed is adjusted by inverter.
• White PVC rubber belt improves visibility during manual sorting.
• Optical bottle sorter can replace manual sorting in high labor cost regions.

Detects metal inside the material and ejects contaminated bottles without stopping the line.

• Intelligent smart learning function automatically ejects bottles containing metal.
• Touch screen and password control support simple and secure operation.
• Designed for both ferrous and non-ferrous metal detection.

Crushes PET bottles into small flakes for downstream washing and separation.

• Water inlet enables wet grinding, extending blade life and reducing dust.
• Upper hopper opens by screw motor to save manpower during maintenance.
• Bearing house is installed outside the crusher chamber to keep dirty material out.

Uses cold water to wash dirty from flakes and separate caps, rings and other floating impurities.

• Top rollers automatically take out caps, rings and impurities with less water carry-out.
• Rotor shaft is made from seamless steel tube.
• Different tank designs are available according to PET bottle recycling requirements.

Uses hot water to remove oil, glue and other dirty from PET bottle flakes.

• Tank insulation layer keeps hot water temperature and saves energy.
• Caustic soda or chemical detergent can be added for better washing effect.
• Water is heated by steam generated from the steam boiler.

Removes dirty water and moisture from PET bottle flakes after washing.

• High rotary speed reaches up to 1500 rpm for better water removal.
• Famous SKF roller bearing is fixed outside for longer service life.
• Inside mesh layer is made from SUS304 and cleaned by water spray system.

Removes final fine labels from PET flakes to reduce PVC content and improve final flake quality.

• Blower air valve controls air flux for separation adjustment.
• Bottom air blower and pipe collect PET flakes efficiently.
• Zig-zag main chamber is made from stainless steel and includes a visible window.