How to maintain the plastic bottle crusher?

A plastic bottle crusher is a machine used to shred or pulverize material into small pieces for reprocessing or other purposes. What are the main features of the plastic crusher? How do we maintain the PVC plastic crusher to prolong its service life?

• What is the technical principle of the plastic bottle crusher?

• What are the main features of the plastic bottle crusher?

• How to maintain the plastic bottle crusher?

PC Crusher

Plastic Crusher

What is the technical principle of the plastic bottle crusher?

The plastic crusher has two kinds of blades, one is a knife with a fixed knife, and the other is a movable knife. The motor drives the rotor to rotate at high speed. When working, the material enters the crushing cavity through the hopper, and is crushed under the impact of the high-speed rotating blade and the fixed blade. The required size can be discharged from the lower part of the machine. After crushing, we can recycle waste plastic into plastic pellets for easy transportation and storage. They are then turned into new products using recycling equipment.

What are the main features of the plastic bottle crusher?

1. plastic bottle crusher is self-developed with reference to advanced technology at home and abroad. This machine is suitable for pulverizing waste PS, PP, PA, PE, PVC, PET, PC material and blowing film rolls. It has the characteristics of low speed, high torque and low noise. plastic bottle crushers are used to shred plastics, recycle waste plastics and clean plastics off-site. It plays a vital role in the timely recycling and processing of plastic waste, waste and recycled materials, improving the utilization rate of plastics.

2. plastic crushers are used to shred waste plastics and scraps into tiny sizes. Commonly used crushers are hammer crusher, blade crusher, combined crusher and so on. According to different materials, the hammer and blade of different models of plastic bottle crushers have different shapes. These shredders can be used to process all kinds of plastics, but the shapes are different for different kinds of plastics.

How to maintain the plastic bottle crusher?

1. During the use of the plastic crusher, if there is a sudden power failure, the machine will automatically stop, and then restart to continue working.

2. After starting the machine, it should be idling for 2-3 minutes before feeding, so as to avoid mechanical damage caused by overload start.

3. The particles should not be too large, otherwise they will not be broken well, or even stuck in the crushing cavity.

4. The screen must be kept clean at all times. If it is found that the screen is blocked by impurities or iron filings, it must be cleaned in time to prevent the motor from being overloaded and burning the copper wire.

5. After using for a period of time, check whether there are iron filings in the crushing cavity and remove them in time to prevent excessive wear of wearing parts such as tool rests and bearings.

6. Every 4 hours, the machine should be shut down for about half an hour for inspection and maintenance, especially the tightening of the screws and nuts of various parts should be checked frequently to ensure that the screws are not loose or lost, so as to avoid accidents when running next time.

Maintain a basic understanding of plastic bottle crushers and follow the instructions given by the manufacturer. With good maintenance, the plastic crusher can be used for a long time and can be used well in production. If you are looking for a good quality and affordable PVC plastic bottle crusher supplier, MOOGE TECH MACHINERY is a good choice.